Suitable awning and casement windows can be fitted with fly screens. The key is being able to open, close and lock the window with the proposed screen in place. Hinge position, controls and available fixing space all affect the choice.
SK Screens & Blinds offers window fly screens in pull-down, fixed and selected pleated arrangements. For many suitable windows and smaller openings, a pull-down screen provides access by raising the mesh into a housing above the opening.
Check how the window moves
An awning window is hinged near the top, with the bottom moving outwards. A casement window is hinged at the side and commonly swings outwards like a small door. The moving glass-and-frame panel is called the sash.
Show the window open and closed during a measure. Its movement, hinges and projecting fittings help establish where the screen can sit and how its housing or guides could attach.
If the frame contains more than one opening panel, show each panel in use. Handles and mounting space may differ across the same window, so note which sections you open regularly and which remain closed.
Keep the controls accessible
An awning window may have a sill-mounted winder, while a casement may use handles or latches around the sash. Check whether you can reach every control with the proposed screen closed, including any secondary latch.
Some window and winder arrangements allow fixed mesh while keeping the controls accessible. Where you need to reach through the opening to operate the sash, a retractable screen may provide that access.
If controls sit behind the mesh, discuss retracting the screen, operating the window and extending the mesh again. Check the closing and locking steps too. Controls that remain accessible may not require the screen to retract for every adjustment.
Demonstrate your normal reach, especially over a bench or sink. Ask for the proposed operation to be explained before ordering and demonstrated after installation.
Leave room for the screen and blinds
A pull-down fly screen needs space for its top housing and vertical side guides, with clearance around handles. A pleated window screen needs room for horizontal operation and mesh gathered at the side.

Blinds can occupy the same recess. Show them raised and lowered, including brackets, rollers or headrails. Check that the blind, window controls and screen can each operate through their intended movement. Discuss planned new blinds before either fitting position is finalised.
Window-screen fitting checks at a glance
| Detail | What to check | Why it matters |
|---|---|---|
| Window movement | Hinges, sash travel and projecting fittings | Establishes space around the moving window. |
| Handle or winder | Control location and comfortable reach | Shows whether controls stay accessible with mesh closed. |
| Mounting space | Housing, guides and frame condition | Helps identify suitable fixing positions. |
| Nearby blinds | Brackets, headrail and fabric travel | Helps the blind and screen operate together. |
For a broader comparison of the options, see our fixed, pull-down and pleated screen guide.
Can a screen be added to an existing window?
Many existing windows can be assessed. Frame condition, fixing points, controls and surrounding space need checking. Send a full-window photo and a close-up of the handle or winder, showing any existing blind or screen.
Request a free measure and quote through our window-screen product page. Our Sydney team will confirm the next step for your opening and service area.
