If you already have fly screens and notice flies or mosquitoes indoors, start by checking the mesh, frame edges and closing position. A screen can look intact from across the room yet leave an opening at its edge. Check other entry points too.
Four checks for your existing screens
Walk through the rooms where you notice insects most often. Include the kitchen window, back door and openings you leave ajar for fresh air. Look at each screen fully closed, then check its movement.
- Mesh condition: look for holes, tears or mesh pulling away from its frame.
- Frame edges: check for gaps between the screen and opening.
- Closing position: make sure the screen reaches its intended closed position.
- Tracks and guides: check for loose dirt or debris that could affect movement.
Clear loose debris gently and avoid forcing a screen that feels stuck. If movement remains rough or a fitting has come loose, have its condition checked. The mesh, frame and operation need to work together.
Check daily use and other entry points
With window fly screens, notice what happens when you reach the winder or handle. If you retract the mesh to operate the window, extend it again afterwards when screening is needed.
For fly screen doors, check whether people close the screen after passing through. The glass door may be open for airflow while the screen remains closed across the opening.
Look for nearby unscreened windows or doors that are regularly left open. Finding insects in a room does not, by itself, identify which opening they used.
Check around the home as well
For flies, pay attention to food scraps and rubbish. Keep food-scrap caddies and outdoor bin lids closed, empty scraps regularly and clean the containers. The City of Sydney's food-scrap guidance recommends closed lids to stop flies laying eggs inside the containers.
Mosquitoes need water to breed, including small amounts collected in containers. NSW Health recommends removing water-holding rubbish, keeping drains and gutters clear, and flushing and wiping out bird baths weekly. Check these areas as well as your screens.
When the existing screen needs attention
If mesh is torn or the screen no longer fits or closes properly, send SK Screens & Blinds photos of the full opening and the affected area, along with your Sydney suburb. Existing screens can be assessed for replacement, depending on the frame, dimensions, tracks and hardware condition.
If replacement is being considered, our fixed, pull-down and pleated screen comparison explains the different operations.
